Aufgaben:Aufgabe 2.8: COST-Verzögerungsmodelle: Unterschied zwischen den Versionen

Aus LNTwww
Wechseln zu:Navigation, Suche
(Die Seite wurde neu angelegt: „ {{quiz-Header|Buchseite=Mobile Kommunikation/Das GWSSUS–Kanalmodell}} right|frame|Zweiwegekanäle ===Fragebogen=…“)
 
Zeile 3: Zeile 3:
  
 
[[Datei:P_ID2178__Mob_Z_2_7.png|right|frame|Zweiwegekanäle]]
 
[[Datei:P_ID2178__Mob_Z_2_7.png|right|frame|Zweiwegekanäle]]
 +
Rechts sind vier Verzögerungs–Leistungsdichtespektren als Funktion der Verzögerungszeit $\tau$ logarithmisch aufgetragen:
 +
:$$10 \cdot {\rm lg}\hspace{0.15cm} ({{\it \Phi}_{\rm V}(\tau)}/{\it \Phi}_{\rm 0}) \hspace{0.05cm},$$
  
 +
Hierbei ist als Abkürzung $\phi_0 = \phi_{\rm V}(\tau = 0)$ verwendet.
  
 +
Es handelt sich um die sog. <i>COST&ndash;Verzögerungsmodelle</i>. Die obere Skizze beinhaltet diebeiden Profile <b>RA</b> (<i>Rural Area</i>) und <b>TU</b> (<i>Typical Urban</i>). Für diese gilt folgender Verlauf:
 +
:$${{\it \Phi}_{\rm V}(\tau)}/{\it \Phi}_{\rm 0} = {\rm exp}[ -\tau / \tau_0] \hspace{0.05cm}.$$
 +
 +
Der Wert des Parameters $\tau_0$ (Zeitkonstante der AKF) soll in der Teilaufgabe (1) aus der Grafik ermittelt werden. Beachten Sie hierzu die angegebenen $\tau$&ndash;Werte für $&ndash;30 \ \rm dB$:
 +
:$${\rm RA:}\hspace{0.15cm}\tau_{-30} = 0.75\,{\rm \mu s} \hspace{0.05cm},\hspace{0.2cm}
 +
{\rm TU:}\hspace{0.15cm}\tau_{-30} = 6.9\,{\rm \mu s} \hspace{0.05cm}.  $$
 +
 +
Die untere Grafik gilt für ungünstigere Verhältnisse in
 +
* städtischen Gebieten (<i>Bad Urban</i>, <b>BU</b>):
 +
:$${{\it \Phi}_{\rm V}(\tau)}/{{\it \Phi}_{\rm 0}} 
 +
= \left\{ \begin{array}{c} {\rm exp}[ -\tau / \tau_0]\\
 +
0.5 \cdot {\rm exp}[ (5\,{\rm \mu s}-\tau) / \tau_0]  \end{array} \right.\quad
 +
\begin{array}{*{1}c} \hspace{-0.55cm}  {\rm Bereich}\hspace{0.15cm}0 < \tau < 5\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 1\,{\rm \mu s} \hspace{0.05cm},
 +
\\  \hspace{-0.15cm} {\,\, \,\, \rm Bereich}\hspace{0.15cm}5\,{\rm \mu s} < \tau < 10\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 1\,{\rm \mu s} \hspace{0.05cm}, \end{array}$$
 +
 +
* in ländlichen Gebieten (<i>Hilly Terrain</i>, <b>HT</b>):
 +
:$${{\it \Phi}_{\rm V}(\tau)}/{{\it \Phi}_{\rm 0}} 
 +
= \left\{ \begin{array}{c} {\rm exp}[ -\tau / \tau_0]\\
 +
{0.04 \cdot \rm exp}[ (15\,{\rm \mu s}-\tau) / \tau_0]  \end{array} \right.\quad
 +
\begin{array}{*{1}c} \hspace{-0.55cm}  {\rm Bereich}\hspace{0.15cm}0 < \tau < 2\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 0.286\,{\rm \mu s} \hspace{0.05cm},
 +
\\  \hspace{-0.35cm} {\rm Bereich}\hspace{0.15cm}15\,{\rm \mu s} < \tau < 20\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 1\,{\rm \mu s} \hspace{0.05cm}. \end{array}$$
 +
 +
Für die Modelle RA, TU und BU sollen folgende Kenngrößen ermittelt werden:
 +
* Die <b>Mehrwegeverbreiterung</b> $T_{\rm V}$ ist die Standardabweichung der Verzögerungszeit $\tau$. Hat das Verzögerungs&ndash;LDS ${\it \Phi}_{\rm V}(\tau)$ einen exponentiellen Verlauf wie bei den Profilen &bdquo;RA&rdquo; und &bdquo;TU&rdquo;, so gilt $T_{\rm V} = \tau_0$, siehe [[Aufgaben:2.7_Koh%C3%A4renzbandbreite| Aufgabe A2.7]].
 +
 +
''Hinweis:''
 +
* Die Aufgabe gehört zum Kapitel [[Mobile_Kommunikation/Das_GWSSUS%E2%80%93Kanalmodell| Das GWSSUS&ndash;Kanalmodell]].
 +
* Vorgegeben sind die folgenden Integrale:
 +
:$$\frac{1}{\tau_0} \cdot \int_{0}^{\infty}\hspace{-0.15cm} {\rm e}^{ -\tau / \tau_0} \hspace{0.15cm}{\rm d} \tau = 1
 +
\hspace{0.05cm},\hspace{0.6cm}
 +
\frac{1}{\tau_0} \cdot \int_{0}^{\infty}\hspace{-0.15cm} {\tau} \cdot{\rm e}^{ -\tau / \tau_0}\hspace{0.15cm}{\rm d} \tau = \tau_0
 +
\hspace{0.05cm},\hspace{0.6cm}
 +
\frac{1}{\tau_0} \cdot \int_{0}^{\infty} \hspace{-0.15cm}{\tau^2} \cdot{\rm e}^{ -\tau / \tau_0}\hspace{0.15cm}{\rm d} \tau = 2\tau_0^2\hspace{0.05cm}.$$
  
  

Version vom 20. November 2017, 23:16 Uhr

Zweiwegekanäle

Rechts sind vier Verzögerungs–Leistungsdichtespektren als Funktion der Verzögerungszeit $\tau$ logarithmisch aufgetragen:

$$10 \cdot {\rm lg}\hspace{0.15cm} ({{\it \Phi}_{\rm V}(\tau)}/{\it \Phi}_{\rm 0}) \hspace{0.05cm},$$

Hierbei ist als Abkürzung $\phi_0 = \phi_{\rm V}(\tau = 0)$ verwendet.

Es handelt sich um die sog. COST–Verzögerungsmodelle. Die obere Skizze beinhaltet diebeiden Profile RA (Rural Area) und TU (Typical Urban). Für diese gilt folgender Verlauf:

$${{\it \Phi}_{\rm V}(\tau)}/{\it \Phi}_{\rm 0} = {\rm exp}[ -\tau / \tau_0] \hspace{0.05cm}.$$

Der Wert des Parameters $\tau_0$ (Zeitkonstante der AKF) soll in der Teilaufgabe (1) aus der Grafik ermittelt werden. Beachten Sie hierzu die angegebenen $\tau$–Werte für $–30 \ \rm dB$:

$${\rm RA:}\hspace{0.15cm}\tau_{-30} = 0.75\,{\rm \mu s} \hspace{0.05cm},\hspace{0.2cm} {\rm TU:}\hspace{0.15cm}\tau_{-30} = 6.9\,{\rm \mu s} \hspace{0.05cm}. $$

Die untere Grafik gilt für ungünstigere Verhältnisse in

  • städtischen Gebieten (Bad Urban, BU):
$${{\it \Phi}_{\rm V}(\tau)}/{{\it \Phi}_{\rm 0}} = \left\{ \begin{array}{c} {\rm exp}[ -\tau / \tau_0]\\ 0.5 \cdot {\rm exp}[ (5\,{\rm \mu s}-\tau) / \tau_0] \end{array} \right.\quad \begin{array}{*{1}c} \hspace{-0.55cm} {\rm Bereich}\hspace{0.15cm}0 < \tau < 5\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 1\,{\rm \mu s} \hspace{0.05cm}, \\ \hspace{-0.15cm} {\,\, \,\, \rm Bereich}\hspace{0.15cm}5\,{\rm \mu s} < \tau < 10\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 1\,{\rm \mu s} \hspace{0.05cm}, \end{array}$$
  • in ländlichen Gebieten (Hilly Terrain, HT):
$${{\it \Phi}_{\rm V}(\tau)}/{{\it \Phi}_{\rm 0}} = \left\{ \begin{array}{c} {\rm exp}[ -\tau / \tau_0]\\ {0.04 \cdot \rm exp}[ (15\,{\rm \mu s}-\tau) / \tau_0] \end{array} \right.\quad \begin{array}{*{1}c} \hspace{-0.55cm} {\rm Bereich}\hspace{0.15cm}0 < \tau < 2\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 0.286\,{\rm \mu s} \hspace{0.05cm}, \\ \hspace{-0.35cm} {\rm Bereich}\hspace{0.15cm}15\,{\rm \mu s} < \tau < 20\,{\rm \mu s}\hspace{0.05cm},\hspace{0.15cm}\tau_0 = 1\,{\rm \mu s} \hspace{0.05cm}. \end{array}$$

Für die Modelle RA, TU und BU sollen folgende Kenngrößen ermittelt werden:

  • Die Mehrwegeverbreiterung $T_{\rm V}$ ist die Standardabweichung der Verzögerungszeit $\tau$. Hat das Verzögerungs–LDS ${\it \Phi}_{\rm V}(\tau)$ einen exponentiellen Verlauf wie bei den Profilen „RA” und „TU”, so gilt $T_{\rm V} = \tau_0$, siehe Aufgabe A2.7.

Hinweis:

$$\frac{1}{\tau_0} \cdot \int_{0}^{\infty}\hspace{-0.15cm} {\rm e}^{ -\tau / \tau_0} \hspace{0.15cm}{\rm d} \tau = 1 \hspace{0.05cm},\hspace{0.6cm} \frac{1}{\tau_0} \cdot \int_{0}^{\infty}\hspace{-0.15cm} {\tau} \cdot{\rm e}^{ -\tau / \tau_0}\hspace{0.15cm}{\rm d} \tau = \tau_0 \hspace{0.05cm},\hspace{0.6cm} \frac{1}{\tau_0} \cdot \int_{0}^{\infty} \hspace{-0.15cm}{\tau^2} \cdot{\rm e}^{ -\tau / \tau_0}\hspace{0.15cm}{\rm d} \tau = 2\tau_0^2\hspace{0.05cm}.$$


Fragebogen

1

Multiple-Choice

correct
false

2

Input-Box Frage

$xyz \ = \ $

$ab$


Musterlösung

(1)  (2)  (3)  (4)  (5)