Aufgaben:Aufgabe 1.1: Dual-Slope–Verlustmodell: Unterschied zwischen den Versionen

Aus LNTwww
Wechseln zu:Navigation, Suche
K (Textersetzung - „*Sollte die Eingabe des Zahlenwertes „0” erforderlich sein, so geben Sie bitte „0.” ein.“ durch „ “)
Zeile 4: Zeile 4:
  
 
[[Datei:P_ID2120__Mob_A_1_1.png|right|frame|Dual-Slope-Pfadverlustmodell]]
 
[[Datei:P_ID2120__Mob_A_1_1.png|right|frame|Dual-Slope-Pfadverlustmodell]]
Zur Simulation des Pfadverlustes in städtischer Umgebung verwendet man oft das asymptotische Dual–Slope–Modell, das im Diagramm als rote Kurve dargestellt ist. Dieses einfache Modell ist durch zwei lineare Abschnitte gekennzeichnet, die durch den sog. Breakpoint (BP) getrennt sind:
+
Zur Simulation des Pfadverlustes in städtischer Umgebung verwendet man oft das asymptotische Dual–Slope–Modell, das im Diagramm als rote Kurve dargestellt ist. Dieses einfache Modell ist durch zwei lineare Abschnitte gekennzeichnet, die durch den so genannten Breakpoint (BP) getrennt sind:
* Für $d \le d_{\rm BP}$ gilt mit dem Exponenten $\gamma_0$:
+
* Für  $d \le d_{\rm BP}$  gilt mit dem Exponenten  $\gamma_0$:
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} ({d}/{d_0})\hspace{0.05cm}.$$
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} ({d}/{d_0})\hspace{0.05cm}.$$
  
* Für $d > d_{\rm BP}$ ist der Pfadverlustexponent $\gamma_1$  anzusetzen, wobei $\gamma_1 > \gamma_0$ gilt:  
+
* Für  $d > d_{\rm BP}$  ist der Pfadverlustexponent  $\gamma_1$  anzusetzen, wobei  $\gamma_1 > \gamma_0$  gilt:  
 
:$$V_{\rm P}(d) =  V_{\rm BP} + \gamma_1 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} ({d}/{d_{\rm BP}})\hspace{0.05cm}.$$
 
:$$V_{\rm P}(d) =  V_{\rm BP} + \gamma_1 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} ({d}/{d_{\rm BP}})\hspace{0.05cm}.$$
 
   
 
   
 
In diesen Gleichungen bedeuten:  
 
In diesen Gleichungen bedeuten:  
* $V_0$ ist der Pfadverlust (in dB) bei $d_0$ (Normierungsdistanz).
+
* $V_0$  ist der Pfadverlust (in dB) bei  $d_0$  (Normierungsdistanz).
* $V_{\rm BP}$ ist der Pfadverlust (in dB) bei $d=d_{\rm BP}$ ("Breakpoint").
+
* $V_{\rm BP}$  ist der Pfadverlust (in dB) bei  $d=d_{\rm BP}$  ("Breakpoint").
  
  
Zeile 22: Zeile 22:
 
  V_{\rm BP} = 50\,{\rm dB}\hspace{0.05cm}.$$
 
  V_{\rm BP} = 50\,{\rm dB}\hspace{0.05cm}.$$
  
In den Fragen wird dieser abschnittsweise definierte Verlauf mit Profil '''(A)'''. Als zweite Kurve ist das Profil '''(B)''' eingezeichnet, das durch folgende Gleichung gegeben ist:
+
In den Fragen wird dieser abschnittsweise definierte Verlauf mit Profil  $\rm A$ bezeichnet.  
 +
 
 +
Als zweite Kurve ist das Profil  $\rm B$  eingezeichnet, das durch folgende Gleichung gegeben ist:
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ( {d}/{d_0} \right )  
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ( {d}/{d_0} \right )  
 
  + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left (1 + {d}/{d_{\rm BP}} \right )\hspace{0.05cm}.$$
 
  + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left (1 + {d}/{d_{\rm BP}} \right )\hspace{0.05cm}.$$
  
Mit diesem  Dual–Slope–Modell ist der gesamte Distanzverlauf geschlossen beschreibbar, und die Empfangsleistung hängt von der Distanz $d$ entsprechend der folgenden Gleichung  ab:
+
Mit diesem  Dual–Slope–Modell ist der gesamte Distanzverlauf geschlossen beschreibbar, und die Empfangsleistung hängt von der Distanz  $d$  entsprechend der folgenden Gleichung  ab:
 
:$$P_{\rm E}(d) =  \frac{P_{\rm S} \cdot G_{\rm S} \cdot G_{\rm E} /V_{\rm zus}}{K_{\rm P}(d)}
 
:$$P_{\rm E}(d) =  \frac{P_{\rm S} \cdot G_{\rm S} \cdot G_{\rm E} /V_{\rm zus}}{K_{\rm P}(d)}
 
  \hspace{0.05cm},\hspace{0.2cm}K_{\rm P}(d) = 10^{V_{\rm P}(d)/10}  
 
  \hspace{0.05cm},\hspace{0.2cm}K_{\rm P}(d) = 10^{V_{\rm P}(d)/10}  
 
  \hspace{0.05cm}.$$
 
  \hspace{0.05cm}.$$
  
Hierbei sind alle Parameter absolut einzusetzen, also nicht logarithmisch in dB. Die Sendeleistung wird zu  $P_{\rm S} = 5 \ \rm W$ angenommen. Die weiteren Größen haben folgende Bedeutungen und Werte:
+
Hierbei sind alle Parameter absolut einzusetzen, also nicht logarithmisch in dB. Die Sendeleistung wird zu  $P_{\rm S} = 5 \ \rm W$  angenommen. Die weiteren Größen haben folgende Bedeutungen und Werte:
* $10 \cdot \lg \ G_{\rm S} = 17 \ \rm dB$ (Gewinn der Sendeantenne),
+
* $10 \cdot \lg \ G_{\rm S} = 17 \ \rm dB$  (Gewinn der Sendeantenne),
* $10 \cdot \lg \ G_{\rm E} = -3 \ \rm dB$ (Gewinn der Empfangsantenne – also eigentlich ein Verlust),
+
* $10 \cdot \lg \ G_{\rm E} = -3 \ \rm dB$  (Gewinn der Empfangsantenne – also eigentlich ein Verlust),
* $10 \cdot \lg \ V_{\rm zus} = 4 \ \rm dB$ (Verlust durch Zuführungen).
+
* $10 \cdot \lg \ V_{\rm zus} = 4 \ \rm dB$  (Verlust durch Zuführungen).
 +
 
 +
 
 +
 
 +
 
  
  
 
''Hinweise:''  
 
''Hinweise:''  
*Die Aufgabe gehört zum Kapitel [[Mobile_Kommunikation/Distanzabh%C3%A4ngige_D%C3%A4mpfung_und_Abschattung|Distanzabhängige Dämpfung und Abschattung]].
+
*Die Aufgabe gehört zum Kapitel  [[Mobile_Kommunikation/Distanzabh%C3%A4ngige_D%C3%A4mpfung_und_Abschattung|Distanzabhängige Dämpfung und Abschattung]].
*Würde man das Profil '''(B)''' entsprechend
+
*Würde man das Profil  $\rm B$  entsprechend
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} \left ( {d}/{d_0} \right )  
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} \left ( {d}/{d_0} \right )  
 
  + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({d}/{d_{\rm BP}} \right )$$
 
  + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({d}/{d_{\rm BP}} \right )$$
:definieren, so wären Profil '''(A)''' und Profil '''(B)''' für $d ≥ d_{\rm BP}$ identisch.  
+
:definieren, so wären Profil  $\rm A$  und Profil  $\rm B$  für  $d ≥ d_{\rm BP}$  identisch.  
*In diesem Fall würde jedoch im unteren Bereich $(d &lt; d_{\rm BP})$ das Profil <b>(B)</b> oberhalb von Profil <b>(A)</b> liegen, und somit deutlich zu gute Verhältnisse suggerieren. Beispielsweise ergäbe sich für $d = d_0 = 1 \ \rm m$ bei den zugrundeliegenden Zahlenwerten ein um $40 \ \rm  dB$ zu gutes Ergebnis:
+
*In diesem Fall würde jedoch im unteren Bereich&nbsp; $(d &lt; d_{\rm BP})$&nbsp; das Profil &nbsp;$\rm B$&nbsp; oberhalb von Profil &nbsp;$\rm A$&nbsp; liegen, und somit deutlich zu gute Verhältnisse suggerieren. Beispielsweise ergäbe sich für&nbsp; $d = d_0 = 1 \ \rm m$&nbsp; bei den zugrundeliegenden Zahlenwerten ein um&nbsp; $40 \ \rm  dB$&nbsp; zu gutes Ergebnis:
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ( {d}/{d_0} \right )  + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({d}/{d_{\rm BP}} \right ) =10\,{\rm dB} + 2 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({1}/{100} \right )
 
:$$V_{\rm P}(d) =  V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ( {d}/{d_0} \right )  + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({d}/{d_{\rm BP}} \right ) =10\,{\rm dB} + 2 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({1}/{100} \right )
 
  = -30\,{\rm dB} \hspace{0.05cm}. $$
 
  = -30\,{\rm dB} \hspace{0.05cm}. $$
Zeile 53: Zeile 59:
  
 
<quiz display=simple>
 
<quiz display=simple>
{Wie groß ist der Pfadverlust (in $\rm dB$) in $100 \ \rm m$ Entfernung nach Profil '''(A)'''?
+
{Wie groß ist der Pfadverlust $($in &nbsp;$\rm dB)$&nbsp; nach&nbsp; $d= 100 \ \rm m$&nbsp; gemäß Profil &nbsp;$\rm A$?
 
|type="{}"}
 
|type="{}"}
$\text{(A):}   \hspace{0.2cm} V_{\rm P}(d = 100 \ \rm m) \ = \ $ { 50 3% } $\ \rm dB$
+
$V_{\rm P}(d = 100 \ \rm m) \ = \ $ { 50 3% } $\ \rm dB$
  
{Wie groß ist der Pfadverlust (in $\rm dB$) in $100 \ \rm m$ Entfernung nach Profil '''(B)'''?
+
{Wie groß ist der Pfadverlust $($in &nbsp;$\rm dB)$&nbsp; nach&nbsp; $d= 100 \ \rm m$&nbsp;  gemäß Profil &nbsp;$\rm B$?
 
|type="{}"}
 
|type="{}"}
$\text{(B):}  \hspace{0.2cm} V_{\rm P}(d = 100 \ \rm m) \ = \ $ { 56 3% } $\ \rm dB$
+
$V_{\rm P}(d = 100 \ \rm m) \ = \ $ { 56 3% } $\ \rm dB$
  
{Welche Empfangsleistung ergibt sich nach $100 \ \rm m$ mit beiden Profilen?
+
{Welche Empfangsleistung ergibt sich nach&nbsp; $100 \ \rm m$&nbsp; mit beiden Profilen?
 
|type="{}"}
 
|type="{}"}
$\text{(A):}  \hspace{0.2cm} P_{\rm E}(d = 100 \ \rm m) \ = \ $ { 0.5 3% } $\ \rm mW$
+
Profil $\text{A:}  \hspace{0.2cm} P_{\rm E}(d = 100 \ \rm m) \ = \ $ { 0.5 3% } $\ \rm mW$
$\text{(B):}  \hspace{0.2cm} P_{\rm E}(d = 100 \ \rm m)  \ = \ $ { 0.125 3% } $\ \rm mW$
+
Profil $\text{B:}  \hspace{0.2cm} P_{\rm E}(d = 100 \ \rm m)  \ = \ $ { 0.125 3% } $\ \rm mW$
  
{Wie groß ist die Abweichung $ΔV_{\rm P}$ zwischen Profil '''(A)''' und '''(B)''' bei $d = 50 \ \rm m$?
+
{Wie groß ist die Abweichung&nbsp; $ΔV_{\rm P}$&nbsp; zwischen Profil &nbsp;$\rm A$&nbsp; und &nbsp;$\rm B$&nbsp; bei&nbsp; $d = 50 \ \rm m$?
 
|type="{}"}
 
|type="{}"}
 
$ΔV_{\rm P}(d = 50 \ \rm m) \ = \ $ { 3.5 3% } $\ \rm dB$
 
$ΔV_{\rm P}(d = 50 \ \rm m) \ = \ $ { 3.5 3% } $\ \rm dB$
  
{Wie groß ist die Abweichung $ΔV_{\rm P}$ zwischen Profil '''(A)''' und '''(B)''' bei $d = 200 \ \rm m$?
+
{Wie groß ist die Abweichung&nbsp; $ΔV_{\rm P}$&nbsp; zwischen Profil &nbsp;$\rm A$&nbsp; und &nbsp;$\rm B$&nbsp;  bei&nbsp; $d = 200 \ \rm m$?
 
|type="{}"}
 
|type="{}"}
 
$ΔV_{\rm P}(d = 200 \ \rm m)\ = \ $ { 3.5 3% } $\ \rm dB$
 
$ΔV_{\rm P}(d = 200 \ \rm m)\ = \ $ { 3.5 3% } $\ \rm dB$

Version vom 28. März 2019, 10:36 Uhr

Dual-Slope-Pfadverlustmodell

Zur Simulation des Pfadverlustes in städtischer Umgebung verwendet man oft das asymptotische Dual–Slope–Modell, das im Diagramm als rote Kurve dargestellt ist. Dieses einfache Modell ist durch zwei lineare Abschnitte gekennzeichnet, die durch den so genannten Breakpoint (BP) getrennt sind:

  • Für  $d \le d_{\rm BP}$  gilt mit dem Exponenten  $\gamma_0$:
$$V_{\rm P}(d) = V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} ({d}/{d_0})\hspace{0.05cm}.$$
  • Für  $d > d_{\rm BP}$  ist der Pfadverlustexponent  $\gamma_1$  anzusetzen, wobei  $\gamma_1 > \gamma_0$  gilt:
$$V_{\rm P}(d) = V_{\rm BP} + \gamma_1 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} ({d}/{d_{\rm BP}})\hspace{0.05cm}.$$

In diesen Gleichungen bedeuten:

  • $V_0$  ist der Pfadverlust (in dB) bei  $d_0$  (Normierungsdistanz).
  • $V_{\rm BP}$  ist der Pfadverlust (in dB) bei  $d=d_{\rm BP}$  ("Breakpoint").


Die Grafik gilt für die Modellparameter

$$d_0 = 1\,{\rm m}\hspace{0.05cm},\hspace{0.2cm}d_{\rm BP} = 100\,{\rm m}\hspace{0.05cm},\hspace{0.2cm} V_0 = 10\,{\rm dB}\hspace{0.05cm},\hspace{0.2cm}\gamma_0 = 2 \hspace{0.05cm},\hspace{0.2cm}\gamma_1 = 4 \hspace{0.3cm} \Rightarrow \hspace{0.3cm} V_{\rm BP} = 50\,{\rm dB}\hspace{0.05cm}.$$

In den Fragen wird dieser abschnittsweise definierte Verlauf mit Profil  $\rm A$ bezeichnet.

Als zweite Kurve ist das Profil  $\rm B$  eingezeichnet, das durch folgende Gleichung gegeben ist:

$$V_{\rm P}(d) = V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ( {d}/{d_0} \right ) + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left (1 + {d}/{d_{\rm BP}} \right )\hspace{0.05cm}.$$

Mit diesem Dual–Slope–Modell ist der gesamte Distanzverlauf geschlossen beschreibbar, und die Empfangsleistung hängt von der Distanz  $d$  entsprechend der folgenden Gleichung ab:

$$P_{\rm E}(d) = \frac{P_{\rm S} \cdot G_{\rm S} \cdot G_{\rm E} /V_{\rm zus}}{K_{\rm P}(d)} \hspace{0.05cm},\hspace{0.2cm}K_{\rm P}(d) = 10^{V_{\rm P}(d)/10} \hspace{0.05cm}.$$

Hierbei sind alle Parameter absolut einzusetzen, also nicht logarithmisch in dB. Die Sendeleistung wird zu  $P_{\rm S} = 5 \ \rm W$  angenommen. Die weiteren Größen haben folgende Bedeutungen und Werte:

  • $10 \cdot \lg \ G_{\rm S} = 17 \ \rm dB$  (Gewinn der Sendeantenne),
  • $10 \cdot \lg \ G_{\rm E} = -3 \ \rm dB$  (Gewinn der Empfangsantenne – also eigentlich ein Verlust),
  • $10 \cdot \lg \ V_{\rm zus} = 4 \ \rm dB$  (Verlust durch Zuführungen).




Hinweise:

$$V_{\rm P}(d) = V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.15cm} \left ( {d}/{d_0} \right ) + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({d}/{d_{\rm BP}} \right )$$
definieren, so wären Profil  $\rm A$  und Profil  $\rm B$  für  $d ≥ d_{\rm BP}$  identisch.
  • In diesem Fall würde jedoch im unteren Bereich  $(d < d_{\rm BP})$  das Profil  $\rm B$  oberhalb von Profil  $\rm A$  liegen, und somit deutlich zu gute Verhältnisse suggerieren. Beispielsweise ergäbe sich für  $d = d_0 = 1 \ \rm m$  bei den zugrundeliegenden Zahlenwerten ein um  $40 \ \rm dB$  zu gutes Ergebnis:
$$V_{\rm P}(d) = V_{\rm 0} + \gamma_0 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ( {d}/{d_0} \right ) + (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({d}/{d_{\rm BP}} \right ) =10\,{\rm dB} + 2 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left ({1}/{100} \right ) = -30\,{\rm dB} \hspace{0.05cm}. $$



Fragebogen

1

Wie groß ist der Pfadverlust $($in  $\rm dB)$  nach  $d= 100 \ \rm m$  gemäß Profil  $\rm A$?

$V_{\rm P}(d = 100 \ \rm m) \ = \ $

$\ \rm dB$

2

Wie groß ist der Pfadverlust $($in  $\rm dB)$  nach  $d= 100 \ \rm m$  gemäß Profil  $\rm B$?

$V_{\rm P}(d = 100 \ \rm m) \ = \ $

$\ \rm dB$

3

Welche Empfangsleistung ergibt sich nach  $100 \ \rm m$  mit beiden Profilen?

Profil $\text{A:} \hspace{0.2cm} P_{\rm E}(d = 100 \ \rm m) \ = \ $

$\ \rm mW$
Profil $\text{B:} \hspace{0.2cm} P_{\rm E}(d = 100 \ \rm m) \ = \ $

$\ \rm mW$

4

Wie groß ist die Abweichung  $ΔV_{\rm P}$  zwischen Profil  $\rm A$  und  $\rm B$  bei  $d = 50 \ \rm m$?

$ΔV_{\rm P}(d = 50 \ \rm m) \ = \ $

$\ \rm dB$

5

Wie groß ist die Abweichung  $ΔV_{\rm P}$  zwischen Profil  $\rm A$  und  $\rm B$  bei  $d = 200 \ \rm m$?

$ΔV_{\rm P}(d = 200 \ \rm m)\ = \ $

$\ \rm dB$


Musterlösung

(1)  Man erkennt direkt aus der Grafik, dass das Profil (A) mit den beiden linearen Abschnitten beim „Breakpoint” $(d = 100 \ \rm m)$ das folgende Ergebnis liefert:

$$V_{\rm P}(d = 100\,{\rm m})\hspace{0.15cm} \underline{= 50\,{\rm dB}} \hspace{0.05cm}.$$


(2)  Mit dem Profil (B) erhält man dagegen bei Verwendung von $V_0 = 10 \ \rm dB$, $\gamma_0 = 2$ und $\gamma_1 = 4$:

$$V_{\rm P}(d = 100\,{\rm m}) = 10\,{\rm dB} + 20\,{\rm dB}\cdot {\rm lg} \hspace{0.1cm}(100)+ 20\,{\rm dB}\cdot {\rm lg} \hspace{0.1cm}(2) \hspace{0.15cm} \underline{\approx 56\,{\rm dB}} \hspace{0.05cm}.$$


(3)  Die Antennengewinne vom Sender $(+17 \ \rm dB)$ und Empfänger $(-3 \ \rm dB)$ sowie die internen Verluste der Basisstation $(+4 \ \rm dB)$ können zusammengefasst werden zu

$$10 \cdot {\rm lg}\hspace{0.1cm} G = 10 \cdot {\rm lg}\hspace{0.1cm} G_{\rm S} + 10 \cdot {\rm lg} \hspace{0.1cm} G_{\rm E} - 10 \cdot {\rm lg}\hspace{0.1cm} V_{\rm zus} = 17\,{\rm dB} -3\,{\rm dB} - 4\,{\rm dB} = 10\,{\rm dB} \hspace{0.3cm} \Rightarrow \hspace{0.3cm} {G = 10} \hspace{0.05cm}.$$

Für das Profil (A) ergab sich folgender Pfadverlust:

$$V_{\rm P}(d = 100\,{\rm m})\hspace{0.05cm} {= 50\,{\rm dB}} \hspace{0.3cm} \Rightarrow \hspace{0.3cm} K_{\rm P} = 10^5 \hspace{0.05cm}.$$

Damit erhält man für die Empfangsleistung nach $d = 100 \ \rm m$:

$$P_{\rm E}(d = 100\,{\rm m}) = \frac{P_{\rm S} \cdot G}{K_{\rm P}} = \frac{5\,{\rm W} \cdot 10}{10^5}\hspace{0.15cm} \underline{= 0.5\,{\rm mW}} \hspace{0.05cm}.$$

Bei Profil (B) ist die Empfangsleistung etwa um den Faktor $4$ kleiner:

$$P_{\rm E}(d = 100\,{\rm m}) = \frac{5\,{\rm W} \cdot 10}{10^{5.6}}\approx \frac{5\,{\rm W} \cdot 10}{4 \cdot 10^{5}}\hspace{0.15cm} \underline{= 0.125\,{\rm mW}} \hspace{0.05cm}.$$


(4)  Unterhalb des Breakpoints $(d < 100 \ \rm m)$ ist die Abweichung durch den letzten Summand von Profil (B) bestimmt:

$${\rm \Delta}V_{\rm P}(d = 50\,{\rm m}) = (\gamma_1 - \gamma_0) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} \left (1 + {d}/{d_{\rm BP}} \right )= (4-2) \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} (1.5)\hspace{0.15cm} \underline{\approx 3.5\,{\rm dB}} \hspace{0.05cm}.$$


(5)  Hier liefert das Profil (A) mit $V_{\rm BP} = 50 \ \rm dB$:

$$V_{\rm P}(d = 200\,{\rm m}) = 50\,{\rm dB} + 4 \cdot 10\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} (2)\hspace{0.15cm} {\approx 62\,{\rm dB}} \hspace{0.05cm}.$$

Dagegen führt das Profil (B) zum Ergebnis:

$$V_{\rm P}(d = 200\,{\rm m}) = 50\,{\rm dB} + 20\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} (200) + 20\,{\rm dB} \cdot {\rm lg} \hspace{0.1cm} (3) = 10\,{\rm dB} + 46\,{\rm dB} + 9.5\,{\rm dB} \hspace{0.15cm} {\approx 65.5\,{\rm dB}}$$
$$\Rightarrow \hspace{0.3cm} {\rm \Delta}V_{\rm P}(d = 200\,{\rm m}) = 65.5\,{\rm dB} - 62\,{\rm dB}\hspace{0.15cm} \underline{\approx 3.5\,{\rm dB}} \hspace{0.05cm}.$$

Man erkennt, dass $\Delta V_{\rm P}$ nahezu symmetrisch zu $d = d_{\rm BP}$ ist, wenn man die Entfernung $d$ wie in der angegebenen Grafik logarithmisch aufträgt.